Description
Download datasheet
Contoh project menggunakan MCP9700
Demo board MCP9700 (with schematic)
Aplikasi penggunaan sensor suhu dengan kipas pendingin
Operating Voltage : 2.3v to 5.0v
Operating Current : 6uA (typical)
Output : 10 mV/°C (typical)
Output Voltage at 0°C : 500mV
Range : 40°C to +125°C
Accuracy : 1°C (typ.) 2°C (max.) for range 0°C to +70°C
Typical Applications
• Automotive
• Hard Disk Drives and Other PC Peripherals
• Entertainment Systems
• Home Appliance
• Office Equipment
• Battery Packs and Portable Equipment
• General Purpose Temperature Monitoring
Connectivity :
The TSA01 should be connected to your controller using shielded twin core cable.
The shield is the 0v ground connection.
One of the cores carries the supply voltage, marked as 5v on the PCB.
The other core carries the temperature voltage, marked as T on the PCB.
Do not power the module from a higher voltage as there are ESD protection diodes on the board that start conducting at around 6v.
Schematic :
Enclosure
We do not supply a enclosure for these, however you do have a couple of choices.
The module is designed to fit a Schneider NSYTBS775 enclosure (RS 2550359430).
If you have access to a 3D printer then you may print your own case from the following STL files.
Base.stl Lid.stl
