Locking Solenoid 6-12Volt DC


Atau beli di official MarketPlace kami:
Klik untuk Beli di Tokopedia
Klik untuk Beli di Bukalapak
Klik untuk Beli di Shopee


Locking Solenoid 6-12Volt DC
Item No. : KR04037

1. Introduction
Solenoids are basically electromagnets: they are made of a big coil of copper wire with an armature (a slug of metal) in the middle. When the coil is energized, the slug is pulled into the center of the coil. This makes the solenoid able to pull from one end.

This solenoid in particular is nice and strong, and has a slug with a slanted cut and a good mounting bracket. It’s basically an electronic lock, designed for a basic cabinet or safe or door. Normally the lock is active so you can’t open the door because the solenoid slug is in the way. It does not use any power in this state. When 9-12VDC is applied, the slug pulls in so it doesn’t stick out anymore and the door can be opened.

2. How to use solenoid ?
This is parts need big Ampere consumptions, don’t direct connect with your controller, is better using with relay module (KR09004/ KR09013)

3. Solenoid information
Length = 45mm
Height = 25mm
Width = 30mm
Stroke shaft = 5mm
Voltage = 6 – 12 Volt DC
Ampere = 500mA (minimum)

Locking Solenoid 6-12Volt DC

Informasi Tambahan

Berat 0.001 kg
Kembali ke Atas