Description
USB2.0 Evaluation Module For Mega Pixel Sensor
Item No. : KR08055
Download EVU USB Board datasheet
Download Software Driveer for EVU20 + AA5620 Module
(BE SURE TO INSTALL THE DRIVER BEFORE YOU PLUG THE CAMERA IN THE FIRST TIME.) If you receive a “Code 10” error after installing this driver, you will need to reinstall the driver but replace the “5620.set” file in the driver directory with the one you can download and unzipped : click here (5620 .set replacement file)
Modul sensor kamera bewarna yang menggunakan CMOS image sensor OV5620 dengan keluaran digital. Modul ini memiliki jalur komunikasi SCCB (Serial Camera Control Bus) untuk mengatur fungsi exposure, gamma, gain, white balance, color matrix dan windowing.
1. Introduction:
It provides a high speed USB interface to upload video data from camera module to USB PC. The EV board is specially designed for evaluating the digital camera module using OmniVision image sensor.
2. Features:
*Transfer speed upto 480Mbps
*Support Win2K /XP
*Work with AA module from COMedia
*Evaluate sensor from VGA to 5 Meg Pixel
*Small board size (61 x 41 mm)
*No external power is required
*Support different sensor module
*Still picture capture by hardware snap shot
*Resolution = 2592×1944 (OV5620) / 5.17Meg CMOS image sensor,OV5620
*Lens format: 1/2.5″
*10Bit RGB raw data output
*Progressive Scan
*Serial Camera Control Bus interface
*Single 3.3V operation
*Low power consumption
3. Omni General Description
ision ® Advanced Information Preliminary Datasheet OV5620 Color CMOS QSXGA (5. 17 MPixel) CAMERACHIPTM with OmniPixel2TM Technology Applications
*Digital still cameras
*Digital video cameras PC camera/ dual mode
*Video conference equipment
*The OV5620 (color) CAMERACHIPTM is a high performance 5. 17 mega-pixel image sensor for digital still image and video camera products. This device incorporates a 2592 x 1944 image array and an on-chip 10-bit A/D converter capable of operating at up to 7. 5 frames per second (fps) in full resolution. The OV5620 can also output 8.
4. USB 2.0 Evaluation Board
EVU20 is the USB 2.0 evaluation board for digital camera module. It provides a high speed USB interface to upload video data from camera module to PC. The EV board is specially designed for evaluating the digital camera module using OmniVision image sensor.
The USB sensor board is included. This is only the EV Board that the sensor board plugs into.
Please Note: Supported on Win2K / XP SP2. We are not sure if it will work on any later versions of windows.
NOTE 1: Because of the difficulty in working with the module alone, and the limited technical support available, it is highly recommended that the EVU20 USB2.0 EV board also be bought with this module.
NOTE 2: These drivers only run on WindowsXP. You can downloaded the Microsoft virtual machine and WinXP mode for Windows7 Professional and the EVU20 and AA5620 hardware and driver works fine under virtual WinXP mode. This link provides the Virtual Machine for WinXP on Win7 Professional:
Install the virtual machine under Win7 Professional and then launch WinXP mode from the start menu. Reboot and the log into WinXP virtual machine again and install the EVU20 as described in included documentation (be sure to install the drivers and reboot before you plug the camera in for the first time). The virtual machine has a USB activation menu to bridge the Win7 Professional hardware to WinXP. The Omnivision Supercam is listed in the virtual machine USB menu and must be enabled to allow WinXP to see the hardware as well.
