DT-SENSE CARBON MONOXIDE SENSORis a sensor module-basedMQ-7, i.e. the sensors that react to the levels of carbon monoxide gas in the air. This module has output of digital data as well ashardwaredesign minimalist aimed to facilitate the process of use of sensorMQ-7. This module can be applied as an early warning alarm, orgas detectorto help industrial processes involving carbon monoxide gas.
DT-SENSE CARBON MONOXIDE SENSORSare designed using high quality SMD components to be used in applications that require reliable performance andspacerequirements are minimal. On the side of the interface, there are two options for theuserthat is TTL UART with baud rate 38400 bps or I2C module allowing forcascadeup to 8 pieces.
I2C: cancascadeup to 8 modules in one line of communication.
Using 10-bit ADC for conversion of analog data from sensors.
Havean outputin the form of digital data with a value of 0 to 1023 (ADC conversion results).
There is 1 piecevariable resistorsfor settingthe thresholdvalue manually.
Provided a couple ofjumpersto configurethe pull-upI2C, load resistor, as well asvariableresistorsthreshold.
Features of controlon/offwith 2 working mode selection i.e.hysterisisandwindow.
The i/o pins are compatible with thelevelof voltage TTL and CMOS.
Features 2 LED as an indicator.
Equipped with a series of EMI filters to reduce electromagnetic interference.
Gas sensors are compatible with:
MQ-3(alcohol).
MQ-4(methane).
MQ-6(LPG).
MQ-7(carbon monoxide).
MQ-135(air quality).
MG-811(carbon dioxide).
Tutorial terkait produk :
Produk dapat dipesan di KlinikRobot (5-7 hari) KlinikRobot melayani pembelian dari DigiKey - USA untuk pelanggan, tanpa minimal order. Harga final termasuk biaya lain-lain dapat dihitung sebagai berikut Harga Final = Harga DigiKey X 1,3 (satu koma tiga) *) Harga Final belum termasuk biaya kirim lokal di…
Privacy Policy Who we are Our website address is: https://klinikrobot.com. Comments When visitors leave comments on the site we collect the data shown in the comments form, and also the visitor’s IP address and browser user agent string to help spam detection.…
STM32 Lite V2.0 Arm Cortex Board Arduino Shield… STM32 Arm Cortex Board Arduino Shield Support Introduction Spruce -LinkSprite STM32 ARM cortex board can be used with OpenJTAG and is compatible withmini ARM cortex-M3 board . It can be used in GCC+Eclipse+openocd+openJtag and Arduino enviroment! When used in Arduino…
Elektronika Digital Elektronika digital merupakan turunan dari elektronika analog, yang mana ditujukan untuk memudahkan analisa rangkaian listrik secara cepat. Walaupun disebut sebagai digital, pada kondisi aktualnya tetaplah muncul berupa analog. Perhatian ilustrasi berikut ini : Signal Analog yang ditandai dengan 1 (High)…
