Description
Programmer IC Family Microchip PIC
Catatan : untuk windows 10 ke atas, silahkan dicoba tanpa instalasi driver, karena USB driver sudah terdeteksi otomatis (biasanya).
K150 PIC Programming already works for Windows 8, Windows 7, Win Vista also with Windows XP
Pinout Information for ICSP (pin 1 count from middle to pin 6 at the edge):
- Pin 1 ~ Vpp (MCLR/ Reset)
- Pin 2 ~ Vcc (5 Volt DC)
- Pin 3 ~ Gnd (Ground)
- Pin 4 ~ Data
- Pin 5 ~ Clock (CLK)
- Pin 6 ~ PGM (LVP)
PIC Microchip Family that can be programmed by this device :
PIC 10F Family : PIC10F200 PIC10F202 PIC10F204 PIC10F206
PIC 12C Family : PIC12C508 PIC12C508A PIC12C509 PIC12C509A PIC12C671
PIC12C672 PIC12CE518 PIC12CE519 PIC12CE673 PIC12CE674
PIC 12F Family : PIC12F508 PIC12F509 PIC12F629 PIC12F675 PIC12F683
PIC 16C Family : PIC16C505 PIC16C554 PIC16C558 16C61 16C62 16C62A
16C62B PIC16C63 PIC16C63A 16C64 PIC16C64A PIC16C65
16C65A PIC16C65B PIC16C66 PIC16C66A PIC16C67 PIC16C620
PIC16C620A PIC16C621 PIC16C621A PIC16C622 PIC16C622A PIC16C71
PIC16C71A PIC16C72 PIC16C72A 16C73 PIC16C73A PIC16C73B
PIC16C74 PIC16C74A PIC16C74B PIC16C76 PIC16C77 PIC16C710
PIC16C711 PIC16C712 PIC16C716 PIC16C745 PIC16C765 PIC16C773
PIC16C774 PIC16C83 PIC16C84
PIC 16F Family : PIC16F54 PIC16F57 PIC16F627 PIC16LF627A PIC16F627A
PIC16F628 PIC16LF628A PIC16F628A PIC16F630
PIC16F648A PIC16F676 PIC16F683 PIC16F684 PIC16F688 PIC16F72 PIC16F73
PIC16F74 PIC16F76 PIC16F77 PIC16F737
PIC16F747 PIC16F767 PIC16F777 PIC16F83 PIC16F84 PIC16F84A PIC16F87
PIC16F88 PIC16F818 PIC16F819 PIC16F870
PIC16F871 PIC16F872 PIC16F873 PIC16F873A PIC16LF873A PIC16F874
PIC16F874A PIC16F876 PIC16F876A PIC16F877 PIC16F877A
PIC 18F Family :
PIC18F242 PIC18F248 PIC18F252 PIC18F258 PIC18F442 PIC18F448
PIC18F452 PIC18F458 PIC18F1220 PIC18F1320 PIC18F2220 PIC18F2320
PIC18F4220 PIC18F4320 PIC18F6525 PIC18F6621 PIC18F8525 PIC18F8621
PIC18F2331 PIC18F2431 PIC18F4331 PIC18F4431 PIC18F2455 PIC18F2550
PIC18F4455 PIC18F4550 PIC18F4580 PIC18F2580 PIC18F2420 PIC18F2520
PIC18F2620 PIC18F6520 PIC18F6620 PIC18F6720 PIC18F6585 PIC18F6680
Installation & Using Guide
1.) First we need to install the Windows Drivers for the Prolific Chip (PL2303)
- Download installation files (available at belows)
- Files contains the following:
- In the extracted folder you would find the following:
- Okay so this folder contains the Prolific Drivers. Before you install the driver. MAKE SURE THE PROGRAMMER IS DISCONNECTED FROM THE PC.
- Run the program “PL2303_Prolific_DriverInstaller_v1.7.0”. It might take a while to install so you would have to wait for it to finish.
2.) After we’ve installed the Prolific Drivers, next thing we have to do is to install the K150 Programming Software “PICPRO_EN”.
- Back to the extracted folder. Look for the folder labelled ‘PIC K150 Software’. Inside you will find an installer for ‘PICPRO_EN’. Install.
- Next you will be prompted to install and to accept the TOA and stuff. Just click yes. Make sure to take note of the installation folder location.
- Next go back to the extracted folder again. Look for the folder named ‘DIYpack25ep’. Copy the contents of the folder.
- Paste the contents of ‘DIYpack25ep’. To the installation folder location of PICPRO_EN. It should look like this:
- From now on you have to open the ‘MICROBRN’ shortcut instead of the ‘PIC+PRO_en’ shortcut. The MICROBRN application is a newer version of the PIC+PRO_en application.
3.) SETTING UP THE BOARD CONFIGURATIONS
- Connect the K150 Programmer to the PC using the USB cable provided
- The PC should detect the K150 as a Prolific Device and the computer will assign a COM port for it.
- Take note of the COM port assignment. Sometimes, more common when you’re installing on a laptop, the COM port assigned will be above 9. If this happens, just open the advance settings of the PROLIFIC COM PORT and choose an available value between 0-9.
- Open the ‘MICROBRN’ shortcut on the desktop.
- If everything was done right, it should display the status “K150 board connected” .
