KR11006 16 Channel Servo Motor Controller

Description

https://www.instagram.com/p/BIkB1mEDbdk/

1. Introduction

This is 16 Channel Servo Motor Controller Module (16pcs servo motor can be controlled by this driver). Controller for up to 16 independent servos. There is jumper pin header that used for separate between Servo Power and Module Power. Built-in Test functions and auto identification of Serial Port, so you can directly connect this servo driver with TTL/USART to USB module (INCLUDED, see picture below) or other Microcontroller (e.g. Arduino, Minimum System) via TTL/ USART communications.

There is software that used to controlling Servo Driver via Computer/ Notebook, please download Software & Manual.

2. Specifications :

• Module Power : 4.5 ~ 5.5 Volt DC
• Servo Power : 4.5 ~ 5.5Volt DC
• Input : TTL/ USART 4 Pin Connector (Rx/Tx/Vcc/Gnd)
• Output : 3×1 pin header (0.1” Pitch headers for servo connections)
• LED Power Indicators for Main Power and Servo Power
• Terminal Strips for Power

3. Pinout informations :

4. Testing at Windows 7 and Windows 10

• Install LCSC Servo Software first, this software include install USB to Serial Driver (Prolific).
• Plug in servo controller using USB to serial (include with kit) to USB port PC, windows will automatically detect as Prolific USB to Serial

• Double check on Device Manager to make sure the USB to Serial is ready ? if not, you need to update the driver by right click on the detected COM port (see pictures below)

• There is new window that you need to choose > Browse My Computer for Driver Software > Let me pick from the list device drivers of my computer > Select USB Driver that suitable for your Windows (in my computer is work when I use year 2011 version, in Windows 7 and Windows 10).

Catatan : jika terdapat warning pada device manager mengenai driver USB PL2302HX phased out sejak 2012, kita bisa instal ulang driver usb > melalui device manager, ikuti tutorialnya pada link berikut ini.

Contoh penggunaan Servo Controller dengan TowerPro SG-5010 :

Analisa signal output dari Servo Controller menggunakan IKALOGIC ScanaLogic-2 :