Sherline CNC Ready Upgrade Kit for Lathe 4530/4100 (6725)

Description

Any existing Sherline lathe or mill can be converted to CNC-ready status with the available conversion kits listed above. The installation will involve drilling and tapping several holes to attach the stepper motor mounts. The kits include drill blocks that are attached to the appropriate table or bed using the single existing hole and then two new holes are drilled using the block as a guide. The holes are then tapped and the new mount installed. In the case of the mill column and the lathe leadscrew, a new leadscrew must also be installed. Complete instructions for the conversion are supplied with the kits.

Sherline CNC Ready Upgrade Kit for Lathe 4530/4100 (6725)

CNC Ready Upgrade Kit

See Manual/ Datasheet :

• 4000/4500-series 15” lathes—6720(6725)

Convert any existing Sherline lathe or mill to CNC-ready status. The installation will involve drilling and tapping several holes to attach the stepper motor mounts. The kits include drill blocks that attach to the appropriate table or bed. They use the single existing hole and then two new holes are drilled using the block as a guide. The holes are then tapped and the new mount installed. In the case of the mill column and the lathe leadscrew, a new leadscrew must also be installed. Complete instructions for the conversion come with the kits.

The 4100/4530 CNC-Ready Lathe Upgrade Kit

The 4100 (4530 metric) is perfect for the 4100-series lathes, which includes the following:

• 3 Stepper Motor Mounts
• CNC Z-axis Screw
• 2 CNC-RH Coupling Preload Nuts
• CNC-LH Coupling Preload Nut
• 6 Stepper Motor Preload Bearings
• 3 CNC Couplings
• CNC Template, Bed Bushing
• CNC Template, Slide Bushing
• Screws for Motor Mount Attachment